Posted by ADSW1243 on
URL: http://forum.featool.com/Importing-gmsh-mesh-file-with-several-subdomains-tp315p325.html

Hello again,

I'm still having trouble importing the geometry for this simple model. I'm completely certain its an error on my part, but having followed through the examples to the best of my ability I'm not managing to get very far.

I have attached 3 example files which I'm hoping you're able to run. The first two demonstrate my attempts to import the .STEP file, whilst the last shows how importing the mesh produced in GMSH just gives me a solid box.

The aim is to form the intersection as in the example Shinkage Fitting with multiple sub-domains, whilst leaving the coil geometry as a separate subdomain where the currents exist.

 
In my case currently I'm told I need to use a completed geometry to make a mesh if I follow this exactly (Attempt1), whilst using the intersection tool on my two sub-domains (Attempt2) allows me to form a grid, but the result only has a single sub domain which is inadequate for modelling the equations and sources (to the best of my understanding).

Again, I'm fairly certain these are technical problems on my part, so any further advice and guidance is greatly appreciated.


Attempt1.fes
Attempt2.fes
Import_GMSH_Grid.fes