Posted by CFD2D on
URL: http://forum.featool.com/Modeling-a-Multi-Tubular-Membrane-Reactor-tp980p1005.html

Precise Simulation wrote

CFD2D wrote

 But can i couple more than one Equation? I need ergun for pressure drop.. than i need convection and Diffusion.. than i need NS.. and I have to Custom all Equation about mixing rules and and and..

Yes, you can couple any number of equations, but be aware that the more couplings you have the more non-linear the problem might be and become more difficult and take longer to solve.

I have 48 cores and i have some time for do this :-)
But than I will need another solver for example to solve my membran probem.. is it possible to run a simulation on variable Cores?

Precise Simulation wrote

CFD2D wrote

Ok But i need to couple Solver like reactingfoam and multiphasefoam.. But than i can directly use
Openfoam I think

The reactingfoam and multiphasefoam OpenFOAM solvers are not available, but you could maybe use the GUI to set up and export mesh and case files

https://www.featool.com/doc/openfoam.html#of_edit

I read this fast but I understood that i can export my FEA Simulation to run it in Openfoam with the Openfoam Solver? But than maybe its better to use directly OpenFoam? Hmmm
If FEA implement all OpenFoam Solver and if it possible to couple the Solver than FEATool I think one of the best CFD Software.. I have a vision :-D

CFD2D