>> print_geom_objects(leg)
*** 1 geom objects ***
 --> Gen 0 (Active Objects)
 1:  'TF2', 'transformed'
           disp:   0.000000  0.030000  0.000000
          scale:   1.000000  1.000000  1.000000
        rotnAng:   0.000000
       rotnCntr:   1.000000  0.000000  0.000000
       rotnAxis:   0.410000  0.470000  0.000000
    0=rad/1=deg:   1.000000

    --> Gen 1
    1:  'CJ2', 'join'
      formula: (SP3+SP19+SP6+SP7+SP8)

       --> Gen 2
       1:  'SP3', 'brep'
           cutplane pt:   0.410000  0.470000  0.300000
         cutplane norm:   0.000000  0.000000  1.000000

          --> Gen 3
          1:  'SP4', 'brep'
              cutplane pt:   0.410000  0.470000 -0.150000
            cutplane norm:   0.000000  0.000000  1.000000

             --> Gen 4
             1:  'E5', 'ellipsoid'
               center:  0.410000   0.470000   0.450000
                radii:  0.090000   0.090000   0.700000
                 axis:  0.000000   0.000000   1.000000

       2:  'SP19', 'brep'
           cutplane pt:   0.410000  0.470000 -0.425000
         cutplane norm:   0.000000  0.000000  1.000000

          --> Gen 3
          1:  'SP19', 'brep'
              cutplane pt:   0.410000  0.470000 -0.150000
            cutplane norm:   0.000000  0.000000  1.000000

             --> Gen 4
             1:  'E6', 'ellipsoid'
               center:  0.410000   0.470000  -0.000000
                radii:  0.055000   0.055000   0.700000
                 axis:  0.000000   0.000000   1.000000

       3:  'SP6', 'brep'
           cutplane pt:   0.410000  0.470000 -0.150000
         cutplane norm:   0.000000  0.000000  1.000000

          --> Gen 3
          1:  'E12', 'ellipsoid'
            center:  0.410000   0.470000  -0.000000
             radii:  0.055000   0.055000   0.700000
              axis:  0.000000   0.000000   1.000000

       4:  'SP7', 'brep'
           cutplane pt:   0.410000  0.470000 -0.150000
         cutplane norm:   0.000000  0.000000  1.000000

          --> Gen 3
          1:  'E4', 'ellipsoid'
            center:  0.410000   0.470000  -0.150000
             radii:  0.065000   0.065000   0.050000
              axis:  0.000000   0.000000   1.000000

       5:  'SP8', 'brep'
           cutplane pt:   0.410000  0.470000 -0.150000
         cutplane norm:   0.000000  0.000000  1.000000

          --> Gen 3
          1:  'E7', 'ellipsoid'
            center:  0.410000   0.470000  -0.150000
             radii:  0.065000   0.065000   0.050000
              axis:  0.000000   0.000000   1.000000

*** end print_geom_objects ***