Post -->Post Options -->Slice Positions not persistent

When I specify only a single cut plane for post processing and display it:



... and then I change to Grid mode:



... and then switch immediately back to Post mode, the selection of "Slice positions" (for those planes that I had set empty - no plane) are re-populated with 0.5 and re-displayed accordingly:



My guess is that this is not intended. Right? Or wrong?

Kind regards,
Randal

 This was an inconsistentcy using default values if a slice position is empty. It should be correct in the latest update.

Precise Simulation wrote

This was an inconsistentcy using default values if a slice position is empty. It should be correct in the latest update.

Yes, it is.  Thank you again for 1.12.2!!

And, in addition for me there was a performance boost. Here's what I suspect was happening:

I would specify slice positions as: [] [] 0.5 and plot. Then leave Post. On return to Post, the display/plot would update to a the default plot spec (0.5 0.5 0.5) which, for me on my machine, took a few seconds. This no longer happens! When I return to Post the plot last plotted (the one I specified) is displayed quickly.

BTW, I also had observed a similar lack of persistence/sync between the Grid size on the main Grid window and that in the Settings dialog, but in 1.12.2, I can no longer reproduce it.  :-)   :-)

One more thing ... it seems that the default is now 0.7 0.5 0.5 ... any reason?

Kind regards,
Randal

randress wrote

One more thing ... it seems that the default is now 0.7 0.5 0.5 ... any reason?

The default slice positions are calculated as "0.5*(x/y/z_max-x/y/z_min)" with respect the current geometry dimensions.