Basic Installation

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Basic Installation

collinmui
I am new to the SW (and FEA in general).

I have version featool-multiphysics-1.12.4

I installed it as a Matlab App using the FEATool Multiphysics.mlappinstall file.

When I start the app, I got the following warning.

Starting the FEATool Multiphysics GUI.
Loading resources can take a minute . . .
. . . . . Warning: Incompatible MEX files detected. Functionality such as the
MUMPS linear solver and fluid-structure interaction (FSI) solver
will not be available. Please change to a compatible and supported
operating system and/or MATLAB version if these features are required.
 
When I run the commend featool testt, it says FAILED with the following log file text.
Most of them finished OK, some of them failed with "Error running GUI script!"

Did I install it wrong?

>> featool testt
Test suite: tutorials_tests
Test suite location: /Users/collin/Documents/Matlab
Log file: /private/var/folders/z9/dkqk5hcn4ks7g9kdxg6gv5nm0000gn/T/FEATool-test.log
17-Aug-2020 11:26:06featool_log.txt


tutorials_tests
   1 - 01_Quickstart/01_hole_in_plate1 ....................
Error running GUI script!
FAILED  in   34.4 seconds
   2 - 01_Quickstart/02_heat_exchanger1 ................... passed  in   44.8 seconds
   3 - 01_Quickstart/03_axisymmetric_flow1 ................
Error running GUI script!
FAILED  in   31.8 seconds
   4 - 01_Quickstart/04_poisson_point1 .................... passed  in   15.5 seconds
   5 - 01_Quickstart/05_wave_equation1 .................... passed  in   16.1 seconds
   6 - 02_Heat_Transfer/01_heat_transfer1 ................. passed  in   13.6 seconds
   7 - 02_Heat_Transfer/02_heat_transfer2 ................. passed  in   17.4 seconds
   8 - 02_Heat_Transfer/03_heat_transfer3 ................. passed  in   49.2 seconds
   9 - 02_Heat_Transfer/04_orthotropic_heat_conduction1 ... passed  in   20.1 seconds
  10 - 02_Heat_Transfer/05_thermal_bridge1 ................ passed  in   63.8 seconds
  11 - 02_Heat_Transfer/06_heat_transfer4 ................. passed  in   21.8 seconds
  12 - 03_Structural_Mechanics/01_euler_beam1 ............. passed  in   20.5 seconds
  13 - 03_Structural_Mechanics/02_bracket_deflection1 ..... passed  in   37.5 seconds
  14 - 03_Structural_Mechanics/03_pressure_vessel1 ........
Error running GUI script!
FAILED  in   35.2 seconds
  15 - 03_Structural_Mechanics/04_hollow_cylinder1 ........ passed  in   18.1 seconds
  16 - 03_Structural_Mechanics/05_thick_plate1 ............
Error running GUI script!
FAILED  in   49.8 seconds
  17 - 03_Structural_Mechanics/06_spanner1 ................ passed  in   21.5 seconds
  18 - 04_Fluid_Dynamics/01_channel_flow1 ................. passed  in   24.1 seconds
  19 - 04_Fluid_Dynamics/02_driven_cavity1 ................ passed  in   37.9 seconds
  20 - 04_Fluid_Dynamics/03_flow_around_cylinder1 ......... passed  in   33.1 seconds
  21 - 04_Fluid_Dynamics/04_backwards_facing_step1 ........
Error running GUI script!
FAILED  in   27.1 seconds
  22 - 04_Fluid_Dynamics/05_vortex_flow1 .................. passed  in   40.1 seconds
  23 - 04_Fluid_Dynamics/06_airfoil1 ...................... passed  in   39.2 seconds
  24 - 04_Fluid_Dynamics/07_compressible_euler1 ...........
me3 =

  MException with properties:

    identifier: 'MATLAB:hg:shaped_arrays:Complex'
       message: 'Complex values are not supported.'
         cause: {0×1 cell}
         stack: [12×1 struct]


ans =

    'Complex values are not supported.'


Error running GUI script!
Error running m-script!
FAILED  in  170.5 seconds
  25 - 04_Fluid_Dynamics/08_turbulent_channel1 ............ passed  in   73.5 seconds
  26 - 04_Fluid_Dynamics/09_turbulent_flow1 ............... ERROR   in   12.5 seconds

         ERROR > OpenFOAM: Could not find any OpenFOAM installation.

  27 - 04_Fluid_Dynamics/10_taylor_couette1 ............... passed  in  122.3 seconds
  28 - 05_Electromagnetics/01_spherical_capacitor1 ........ passed  in   35.1 seconds
  29 - 05_Electromagnetics/02_permanent_magnet1 ........... passed  in   27.5 seconds
  30 - 05_Electromagnetics/03_wave_guide1 ................. passed  in   19.4 seconds
  31 - 05_Electromagnetics/04_conducting_sphere1 .......... passed  in   26.0 seconds
  32 - 05_Electromagnetics/05_parallel_wires1 ............. passed  in   39.1 seconds
  33 - 05_Electromagnetics/06_microstrip_capacitance1 ..... passed  in   36.9 seconds
  34 - 06_Multiphysics/01_resistive_heating1 .............. passed  in   39.7 seconds
  35 - 06_Multiphysics/02_porous_flow1 .................... passed  in  105.6 seconds
  36 - 06_Multiphysics/03_brake_disc1 ..................... passed  in   45.5 seconds
  37 - 06_Multiphysics/04_natural_convection1 ............. passed  in   87.3 seconds
  38 - 06_Multiphysics/05_piezo_electric1 ................. passed  in   32.4 seconds
  39 - 06_Multiphysics/06_thermo_mechanical1 .............. passed  in   18.6 seconds
  40 - 06_Multiphysics/07_fluid_structure1 ................ ERROR   in   21.9 seconds

         ERROR > Could not find unique uicontrol with identifier tstep

  41 - 06_Multiphysics/08_solenoid_stress1 ................ passed  in   45.9 seconds
  42 - 07_Classic_PDE/01_poisson1 ......................... passed  in   10.6 seconds
  43 - 07_Classic_PDE/02_circular_drum1 ................... passed  in   14.2 seconds
  44 - 07_Classic_PDE/03_resonance1 ....................... passed  in   20.2 seconds
  45 - 07_Classic_PDE/04_black-scholes1 ................... passed  in   12.8 seconds
  46 - 07_Classic_PDE/05_shallow_water1 ................... passed  in   95.6 seconds
  47 - 07_Classic_PDE/06_interference_diffraction1 ........ passed  in   29.0 seconds
Test suite: tutorials_tests ....................................... FAILED in 1855.3 seconds
Warning: Large log file truncated. Open
"/Users/collin/Documents/MATLAB/.featool/featool_log.txt" in a text editor to view full log.

featool_log.txt

Here is the beginning of the text of featool_log.txt (not sure it actually uploaded)

7-Aug-2020 11:26:01: LC : key file does not exist.
17-Aug-2020 11:26:01: LC : key file does not exist.
17-Aug-2020 11:26:04: Starting FEATool Multiphysics, Version 1.12.4, Build Number 20.08.221
17-Aug-2020 11:26:02: System {"system":["MACI64-L","OSX_10.13.6","UnknownMacCPU","MATLAB 9.5.0.944444 (R2018b)"]}:F21898279916; MATLAB MATLAB 9.5.0.944444 (R2018b)
17-Aug-2020 11:26:02: License

17-Aug-2020 11:26:04: tempdir(W)  = /private/var/folders/z9/dkqk5hcn4ks7g9kdxg6gv5nm0000gn/T/
17-Aug-2020 11:26:04: app_home    = /Users/collin/Library/Application Support/MathWorks/MATLAB Add-Ons/Apps/FEAToolMultiphysics
17-Aug-2020 11:26:04: app_path(W) = /Users/collin/Documents/MATLAB/.featool
Starting new model...


Reply | Threaded
Open this post in threaded view
|

Re: Basic Installation

Precise Simulation
Administrator
The warnings indicate that the shared Matlab mex/libraries for certain solvers can't be loaded nor used due to system incompatibilities. Most likely you can use the most functionality anyway as most of the test suite seemed to pass.